L37, 5 - 30 Minute Timer circuit
- Admin
- Apr 15, 2020
- 1 min read

A switched timer for intervals of 5 to 30 minutes incremented in 5 minute steps. Configured by Monostable of 555. Simple to build, simple to make, nothing too complicated here. How-ever you must use the CMOS type 555 timer designated the 7555, a normal 555 Timer will not work exactly here due to the resistor values, but First you should try with normal 555 then 7555. Also a low leakage type capacitor must be used as for C1. When switch S1 is push, pin2 get a trigger pulse and output comes on pin3. And relay will operate. You can connect any home appliances to relay. Like table lamp, table fan etc.
Components-
555 Timer IC
Transistor BC109C
Capacitors C1 = 3uf, C2 = 100nf,
Diode D1 = 1N4007
Resistors R1-R8 = 8.2M, R7 = 4.7K, R8 = 100K
Relay 9volt or 6volt
Switches S1, S2 & S3
9volt Battery
NOTE; In any case, circuit doesn’t work, connect pin 5 to the ground with a series capacitor of 0.01uf value, and remove capacitor C2.
Comments